These Ray-Ban RW4010 Replacement Lenses are aftermarket lenses made for the Meta Skyler Gen 1 frame. The first Ray-Ban Meta Skyler has a lens that rises toward the outer corner, and that cat-eye line is hard to match with a generic cut. This pair is shaped for the RW4010 at 52 mm wide and 42 mm high. If your Skyler is the later RW4014, use its own listing.

Ray-Ban RW4010 Replacement Lenses: fit and measurements

On a cat-eye frame the lens is not symmetrical: the outer upper corner lifts, and the left and right lenses are mirror images. Each order therefore includes one of each, cut to 52 mm wide and 42 mm high for the RW4010. The Skyler has been sold in more than one generation with very similar measurements, so check the code on the inside of your temple rather than going by appearance.

Lens material, colours and coatings

Tinted lenses are polycarbonate, curved to Base 6, with UV400 protection; clear lenses are CR39 or polycarbonate, depending on the coating. Choose your tint on this page and preview it on the frame. Green keeps colours close to natural, grey is the most neutral, and brown adds warmth and contrast. Gradients are darker at the top and lighter below, mirrors add a reflective finish on the front, and clear suits indoor use. Optional coatings appear under the colour selector.

Why change the lenses and keep the frame

Changing the lenses means you keep the frame you already own, along with its camera and electronics. It is also a way to change the look or the tint without replacing the glasses. We have more models in our Ray-Ban replacement lenses section if you own another pair.

Frequently asked questions

How do I know this is my model?

Look at the inside of the temple, where the model code and size are printed. It should read RW4010. If it shows another code, look for that model in the shop or write to us before ordering.

Do the smart features depend on the lens?

The camera and LED sit in the frame, not in the lens, and we only supply the lenses. Be careful with the frame while changing them, because it carries the electronics, and never heat it.

Are these made by Ray-Ban or Meta?

No. They are aftermarket lenses, independently made to fit the RW4010. They are not produced or endorsed by Ray-Ban or Meta.

What warranty and returns do I get?

You have a 3-year warranty against manufacturing defects and 14 days to return the lenses.

Is a pair included, or a single lens?

A pair: one left lens and one right lens, in the tint you select.