Showing 73–96 of 112 resultsSorted by popularity
-
Replacement Temple Arms for Ray-Ban RX6456 - Metal 140mm
From 37.73$ -
Replacement Arms for Ray-Ban 4292N Blaze Doublebridge
From 37.73$ -
Replacement Arms for Ray-Ban RB8157
From 37.73$ -
Replacement Arms for Ray-Ban RB3543 Aviator - Metal 140mm
From 37.73$ -
Replacement Temple Arms for Ray-Ban RX7097 (140mm Metal)
From 37.73$ -
Replacement Metal Arms for Ray-Ban RX6377 (140mm)
From 37.73$ -
Replacement Temple Arms for Ray-Ban RX3578V
From 36.33$ -
Replacement Temple Arms for Ray-Ban RB4354
From 37.73$ -
Replacement Temple Arms for Ray-Ban RB3558 140mm
From 37.73$ -
Replacement Temple Arms for Ray-Ban RB3477 Aviator Glasses
From 37.73$ -
Replacement Temple Arms for Ray-Ban RB3460 Aviator Flip Out
From 37.73$ -
Replacement Arms for Ray-Ban RB3610 Shooter
From 37.73$ -
Replacement Arms for Ray-Ban 4037
From 37.73$ -
Replacement Arms for Ray-Ban RB4369M
From 37.73$ -
Replacement Arms for Ray-Ban RB3583N Blaze The General
From 37.73$ -
Replacement Temple Arms for Ray-Ban RB3581N Blaze Shooter
From 37.73$ -
Replacement Arms for Ray-Ban RB3587CH 140mm Metal
From 37.73$ -
Replacement Temple Arms for Ray-Ban RB4311N
From 37.73$ -
Replacement Temple Arms for Ray-Ban RX1970V Oval Eyeglasses
From 37.73$ -
Replacement Temple Arms for Ray-Ban RX1969V Rectangle
From 37.73$ -
Replacement Arms for Ray-Ban RX6589 Aviator Gaze 140mm
From 37.73$ -
Replacement Arms for Ray-Ban RB2448N - 145mm Metal Temple
From 37.73$ -
Replacement Temple Arms for Ray-Ban RX6441 The General Gaze (140mm Metal)
From 37.73$ -
Replacement Metal Arms for Ray-Ban RX6437 - 140mm
From 37.73$
A snapped temple is the most common reason a good frame ends up in a drawer. This category holds 112 replacement temple arms for Ray-Ban frames, all between €36.33 and €37.73, split into 81 references for sunglasses and 31 for eyeglasses, in metal and acetate.
Metal frames are served by the RB3447 Round Metal, RB3548N Hexagonal, RB3016 Clubmaster and RB3025 Aviator; acetate temples cover shapes like the RB2140 Wayfarer in 150 mm. On the eyeglasses side the codes start with RX: the RX2447V takes a metal temple in 145 mm.
How to choose the right temple arm
- Read the engraving inside the temple you still have: the frame code (RB or RX plus four digits) and the length in mm, the last of the three size figures. Our guide to codes and sizing explains it.
- Check the hinge before ordering. Metal temples use a barrel hinge held by a small screw; acetate temples are thicker there. The temple replacement guide covers both.
- Buy the pair if both sides are worn: finishes drift between production runs, so two new temples match each other better.
- Have the right driver ready — a precision screwdriver of around 1.4 mm. Our accessories section stocks 3-in-1 and 4-in-1 drivers.
Frequently asked questions
Are these temple arms original?
They are compatible replacement parts of independent manufacture, made to fit Ray-Ban frames; they are not Ray-Ban products.
Can I buy just one temple?
Yes. Each listing states whether it is a left, a right or a pair, so you replace only the side that broke.
Is fitting difficult?
It takes a few minutes. Line up the hinge barrels, start the screw by hand so it does not cross-thread, then tighten until the temple folds with light resistance.
Will my lenses be affected?
The lenses stay in the frame front, so a temple change leaves them untouched. If the frame has spread, close the hinges gently first.
What if the temple is the wrong one?
Returns stay open for 14 days, and every temple carries a three-year warranty against manufacturing defects.
Identify your code and length, order the side you need, and we ship free worldwide, with 14-day returns and a three-year warranty against manufacturing defects. Opticians buy at 10–25% off through the professional programme.